Loading...
01-0696-019 Southeastern Metals MfZ. Co., Inc. ACCEPTANCE NO: 98-1016.08 APPROVED FEB 1 1 1999 EXPIRES 02/15/2002 NOTICE OF ACCEPTANCE: SPECIFIC CONDITIONS 1. SCOPE 1.1 This renews the Notice of Acceptance No. 96-0624.01 that was issued on 08/01/96. It approves wood connectors; as described in Section 2 of this Notice of Acceptance, designed to comply with the South Florida Building Code (SFBC), 1994 Edition for Miami-Dade County. For the locations where the actual loads as determined by SFBC Chapter 23, do not exceed the design load indicated in the approved drawings. 2. PRODUCT DESCRIPTION 2.1 Tile Semco Wood Connectors shall be fabricated and used in strict compliance with the following documents: Drawing No.96-0624.01, titled "Wood Connectors", prepared by Southeastern Metals Mfg. Co., Inc., dated 11/18/98 sheet 1 of 1. The drawings shall bear the Miami-Dade County Product Control Approval stamp with the Notice of Acceptance number and approval date by the Miami-Dade Product Control Division. These documents shall hereinafter be referred to as the approved drawings. 3. LINNTITATIONS 3.1 Allowable loads are for Southern Yellow Pine with a specific gravity of 0.55 and moisture content of 19% or less. 3.2 Allowable loads are based on testing per ASTM D1761 and calculations per National Design Specifications for wood construction 1991 Edition. I: 4. INSTALLATION 4.1 The wood connectors shall be installed in strict compliance with the approved drawings. S. LABELING 5.1 Each wood connector shall bear a permanent label with the manufacturer's name or logo, city, state and the following statement: "Miami-Dade County Product Control Approved". 6. DUILD.iIC PERNTIT 6.1 Applic,-ition for Building Permit shall be accompanied by copies of the following: 6.1.1 This Notice of Acceptance 6.1.2 Duplicate copies of the approved drawings as identified in Section 2 of this Notice of Acceptance, clearly marked to show the hangers and angles selected for the proposed installation. J 6.1.3 Any other document required by the Building Official or the SFBC in order to properly evaluate the instailation of these products. Candido Font, PE, Sr. Product Control Examiner Product Control Division 2of3