00-0833-013 DIVISION 11 - EQUIPMENT
11. CUT AND FIT CARPET NEATLY AROUND PROJECTIONS THROUGH FLOOR, SNUG TO WALLS AND OTHER VERTICAL SURFACES. PROJECTION SCREENS (11132)
WHERE NO BASE IS SCHEDULED, FIT CARPET SNUGLY, WITHOUT GAPS OR RISES WHERE CARPET MEETS OTHER SURFACES.
CARPETING (09680) 1. PROJECTION SCREENS AS NOTED ON DRAWINGS.
12, DO NOT PLACE HEAVY OBJECTS SUCH AS FURNITURE ON CARPETED SURFACES FOR MINIMUM 24 HOURS,
WORK INCLUDES
1. BROADLOOM CARPET FOR DIRECT-GLUE INSTALLATION. 13. AT PENETRATIONS, CUT AN 'X' IN THE CARPET OF SIZE REQUIRED, TO BE CONCEALED BY ESCUTCHEONS OR FLANGES, AND APPLIANCES (11900)
FOLD FLAPS UNDER. 1. PROVIDE MISCELLANEOUS APPLIANCES AND EQUIPMENT, INCLUDING RELATED ACCESSORIES, AS SHOWN ON THE DRAWINGS OR
2. BROADLOOM CARPET WITH PAD AND ACCESSORIES FOR TACKLESS INSTALLATION. 14. SALVAGE AS REMAINDER STOCK PIECES LARGER THAN FOUR SQUARE FEET OF MINIMUM 12 INCH WIDTH. INDICATED BELOW.
3. EDGE STRIPS WHERE CARPETING TERMINATES AT OTHER FLOORING FINISHES: DIRECT-GLUE INSTALLATION 2. QUALITY ASSURANCE:
SUBMITTALS 1. APPLY ADHESIVE AT RATES AND WITH METHODS AND TACK-TIME RECOMMENDED BY CARPET MANUFACTURER. A. CERTIFICATION LABELS: PROVIDE APPLIANCES WHICH COMPLY WITH STANDARDS, BEARING APPROPRIATE LABELS AS
FOLLOWS:
1. SUBMIT THE FOLLOWING IN ACCORDANCE WITH SECTION 01340. 2. LAY CARPET ON PROPERLY CURED ADHESIVE AND ROLL AS REQUIRED TO ACHIEVE FULL BOND BETWEEN ADHESIVE AND 1. UL STANDARDS: UL LABELS REQUIRED.
BACKING WITHOUT AIR POCKETS AND UNEVEN TENSION.
3. SUBMITTALS:
2. SHOP DRAWINGS/SEAMING DIAGRAMS: 3. COMPLETE SEAMING AS WORK PROGRESSES.
A. CLEARLY INDICATE METHOD OF JOINING SEAMS FOR EACH TYPE OF CARPET SPECIFIED, TYPE OF ADHESIVE TO BE 4. DO NOT ADHERE FLAPS TO SLAB AT 'X' CUTS. A. SUBMIT THE FOLLOWING IN ACCORDANCE WITH SECTION 01340.
USED, METHOD OF INTEGRATING EDGE STRIPS WITH CARPET, AND INSTALLATION PROCEDURES, B. PRODUCT DATA: SUBMIT MANUFACTURER'S SPECIFICATIONS AND INSTALLATION FOR EACH ITEM, INCLUDING DATA
B. SEAMING: SUBMIT COMPLETE LAYOUT PLANS INCLUDING LOCATIONS OF SEAMS. CLEANING AND PROTECTION INDICATING COMPLIANCE WITH REQUIREMENTS. INCLUDE OPERATING AND MAINTENANCE INSTRUCTIONS WITH EACH ITEM.
IDENTIFY RE-USED PORTIONS (IF ANY). 1. PREPARE FLOOR IN ACCORDANCE WITH CARPET AND ADHESIVE MANUFACTURERS' RECOMMENDATIONS. 4, DELIVERY, HANDLING, AND STORAGE
C. INDICATE LOCATION OF ANY PROPOSED DYE LOT VARIABLE 2. REMOVE EXCESS ADHESIVE (SPILLS, OXIDATION) AS IT OCCURS. USE SOLVENTS APPROVED BY CARPET MANUFACTURER. A. ORDER PRODUCTS IN SUFFICIENT TIME TO MEET REQUIREMENTS OF CONSTRUCTION SCHEDULE.
International
3. SAMPLES: 3. REPLACE DAMAGED OR DEFECTIVE WORK WHERE REQUIRED. REPLACE ENTIRE CARPET SURFACE IF REQUIRED TO ACHIEVE B. DELIVER PRODUCTS TO PROJECT SITE IN MANUFACTURER'S UNDAMAGED PROTECTIVE CONTAINERS.
COLOR OR PATTERN UNIFORMITY. Design P
, A SUBMIT ONE 2 FOOT X 4 FOOT SAMPLE OF EACH CARPET TYPE AND EACH COLOR REQUIRED AND ONE 2 FOOT X 2 FOOT C. HANDLE AND STORE IN ACCORDANCE WITH REQUIREMENTS OF SECTION 01600.
SAMPLE OF EACH TYPE UNDERLAYMENT. PROVIDE EACH SAMPLE WITH THREE SAMPLE SEAMS; ONE DIAGONALLY FROM CORNER 4. VACUUM CARPET AFTER INSTALLATION IS COMPLETE.
TO CORNER, ONE AT MID-POINT FROM SIDE TO SIDE AND ONE AT THIRD POINT FROM TOP TO BOTTOM, 5' WARRANTY Incorporated
5. PROTECT CARPET FROM DAMAGE USE PLYWOOD OR HARDBOARD RUNWAY'S TO PROTECT FROM SUBSEQUENT OPERATIONS.
B. SUBMIT A PILOT (UNBACKED) SAMPLE PRIOR TO MANUFACTURING OF EACH TYPE AND / OR COLOR OF CARPET AND A A. INCLUDE MANUFACTURER'S WARRANTY DATA
FINISHED (BACKED) CARPET SAMPLE PRIOR TO SHIPMENT WITH ENOUGH TIME ALLOWED FOR ANY NECESSARY ADJUSTMENTS. INTERIOR PAINTING (09910)
ADDITIONAL 2-FOOT SQUARE SAMPLES MAY BE REQUIRED. 6. COORDINATION:
1. APPLICATOR SHALL INSPECT ALL SURFACES SCHEDULED TO RECEIVE NEW FINISH. TAPE JOINTS AND INDENTATIONS SHALL
C. SUBMIT 12-INCH LONG SAMPLES OF EACH TYPE AND COLOR OF RESILIENT AND METAL EDGE STRIPPING. NOT `TELESCOPE' OR READ THROUGH THE PAINT FINISH AND WALLCOVERING. DO NOT PROCEED WITH WORK UNTIL A. PROVIDE SUBMITTAL DATA TO OTHER CONTRACTORS WHOSE WORK IS REQUIRED TO ACCOMMODATE OR RECEIVE 30 W. Mashta Drive
4. PRODUCT DATA. SUBMIT MANUFACTURER'S TECHNICAL LITERATURE FOR EACH TYPE OF CARPET, PAD AND ACCESSORY ITEM UNSATISFACTORY CONDITIONS HAVE BEEN CORRECTED. APPLIANCES. COORDINATE ROUGH AND FINAL OPENING REQUIREMENT'S. Key Biscayne, F1 33149
REQUIRED. 2. WORK SHALL BE 3-COAT QUALITY, USING COMPATIBLE PRIMERS AND PREPARATION ON SUBSTRATES AS RECOMMENDED BY B. PROVIDE SUBMITTAL DATA TO MECHANICAL, ELECTRICAL, AND PLUMBING CONTRACTORS AND COORDINATE SERVICE Tel; 305,365.8338/Fax; 305,365,8339
FINISH COAT MANUFACTURERS. ALL PAINTING MATERIALS SHALL BE USED ONLY IN STRICT CONFORMANCE WITH THE ROUGH-IN SIZES, TYPES, LOCATIONS AND OTHER ASPECTS BEFORE SERVICES ARE CONCEALED OR COVERED BY SUBSEQUENT
5.'CERTIFICATION: MANUFACTURER'S LATEST PRINTED SPECIFICATIONS AND INSTRUCTIONS. WORK. E-mail: IDPmIa®a01,C0II1
A. SUBMIT MANUFACTURER'S CERTIFICATION STATING THAT EACH TYPE OF CARPET PRODUCT COMPLIES WITH 3. PAINT SHALL BE APPLIED BY SKILLED TRADESPEOPLE AND SHALL BE FREE OF ALL RUNS, BRUSH MARKS, SAGS, HOLIDAYS 7. ACCEPTABLE MANUFACTURERS:
PERFORMANCE REQUIREMENTS. AND OTHER DEFECTS. ARCHITECT WILL REJECT FOR SUCH DEFECTS.
A. PROVIDE APPLIANCES OF MANUFACTURERS SHOWN ON THE DRAWINGS, WITHOUT SUBSTITUTIONS. NO, Issue Date
B. LIST MILL REGISTER NUMBERS FOR EACH TYPE OF CARPET FURNISHED. 4. EDGES ADJOINING OTHER MATERIALS OR COLORS SHALL BE SHARP AND CLEAN, WITHOUT OVERLAPPING.
.
C. SUBMIT LETTER STATING ACCEPTABILITY Of INSTALLER, 5. ARRANGEMENTS SHALL BE MADE FOR PROPER VENTILATION BEFORE PAINTING WORK IS BEGUN. 8. MATERIAL AND FABRICATION: 1 Permit 0 3-0 9-0 0
A. COLORS: PROVIDE MANUFACTURER'S STANDARD COLORS AS SHOWN OR SCHEDULED, IF NO COLOR INDICATED, 2. Construction/Pricing 03-14-00
B. MAINTENANCE DATA. PROVIDE 3 COPIES OF CARPET MANUFACTURER'S DETAILED MAINTENANCE RECOMMENDATIONS FOR THE 6. PROPER PRECAUTIONS SHALL BE TAKEN TO PROTECT ALL AREAS FROM PAINT DRIPS, SPLASHES, OVERSPRAY, ETC. ALL INCLUDE COMPREHENSIVE COLOR SAMPLES IN PRODUCT DATA SUBMITTAL
CARE, CLEANING AND REPAIR OF CARPETS INSTALLED, IN ACCORDANCE WITH SECTION 01700, GLAZING SHALL BE MASKED ON BOTH SIDES. CONTRACTOR SHALL BE RESPONSIBLE FOR REMOVAL OF MASKING AND
CLEANING OF GLAZED AREAS. 9. INSTALLATION:
DELIVERY, STORAGE AND HANOUNG 7. PAINT COLORS SHALL MATCH ADJACENT AREAS AND SHALL COMPLETELY HIDE AND COVER THE SUBSTRATE PAINT A. INSTALL UNITS IN ACCORDANCE WITH MANUFACTURER'S INSTRUCTIONS.
MANUFACTURER , AND COLORS AS INDICATED ON FINISH PLAN / SCHEDULE. PAINT FINISH SHALL BE A LOW SHEEN, EGG
i. PROTECT PRODUCTS FROM DAMAGE SHELL TQOACRYLIC ENAMEL, ALKYD BASED FOR DRYWALL SURFACES, AND SEMI-GLOSS ALKYD BASED FOR DOORS, DOOR 10. ADJUSTING AND CLEANING:
FRAMES, METAL SHELVING AND LIKE SURFACES.
2. DELIVER CARPETING MATERIALS IN ORIGINAL MILL PROTECTIVE WRAPPING WITH MILL TAGS ATTACHED. A. ENSURE THAT OPERATING PARTS WORK FREELY AND FR NEATLY. ADJUST HARDWARE AND MOVING PARTS AS NECESSARY.
B. PROVIDE A SAMPLE, MINIMUM 8-1/2' X 11' IN SIZE, OF EACH PAINT TYPE AND WHEN LIGHTING THROUGHOUT IS AT FILL
3. STORE OPENED ROLLS IN AREA OF APPLICATION. MAINTAIN ROOM TEMPERATURE AT MINIMUM 60.F FOR AT LEAST 3 DAYS FINAL ILLUMINATION LEVEL. PROVIDE A FULL HEIGHT 10' SAMPLE AT SITE ON DRYWALL FOR ARCHITECTS REVIEW PRIOR TO THE B. REPAIR OR REPLACE DAMAGED PARTS, DENTS, BUCKLES, ABRASIONS OR OTHER DEFECTS AFFECTING APPEARANCE OR
PRIOR TO INSTALLATION. COMMENCEMENT OF WORK. SERVICEABILITY, SO THAT UNITS ARE IN UNDAMAGED CONDITION AT TIME OF FINAL ACCEPTANCE.
SIZE CONDITIONS 9. THE FOLLOWING ENVIRONMENTAL CONDITIONS SHALL BE PROVIDED BEFORE PAINTING WORK IS TO BEGIN: C. CLEAN AND WAX SURFACES PRIOR TO FINAL COMPLETION.
A. MAINTAIN INTERIOR OF BUILDING SPACE WITH TEMPERATURE OF 60 F MINIMUM AND 85 F MAXIMUM AND A
1. DO NOT COMMENCE CARPET INSTALLATION UNTIL PAINTING AND FINISHING WORK IS COMPLETE AND CEILING AND OTHER RELATIVE HUMIDITY OF LESS THAN 70% FOR THREE (3) DAYS PRIOR TO START OF PAINTING WORK, DURING THE
OVERHEAD WORK HAS BEEN TESTED, APPROVED AND COMPLETED. PAINTING PROCESS AND AFTER PAINTING WORK HAS BEEN APPLIED.
2. INSTALL CARPETING AFTER LIGHTING SYSTEM IS OPERATIONAL THROUGHOUT DESIGNATED CARPETED AREAS. B. LIGHTING IN ALL SPACES SHALL BE FULL FINAL ILLUMINATION LEVEL CONTRACTOR SHALL PROVIDE TEMPORARY
LIGHTING WHERE REQUIRED. DIVISION 12: FURNISHINGS
WARN 10. WHERE ELECTROSTATIC PAINTS ARE SPECIFIED, CONTRACTOR TO USE THE METHODS AND MATERIALS AS SPECIFIED BY
1, PROVIDE WARRANTY, IN ACCORDANCE WITH SECTION 01700, SIGNED BY THE MANUFACTURER, INSTALLER AND CONTRACTOR TO MANUFACTURER. SUBCONTRACTOR TO PERFORM THE WORK SHALL BE AS RECOMMENDED BY THE ARCHITECT. WINDOW TREATMENT (12500)
PROVIDE FOR PROMPTLY MAKING GOOD OR REPLACING AT NO COST, DEFECTIVE MATERIALS OR WORKMANSHIP WITHIN THE CLIENT APPROVAL
FOLLOWING PERIODS: 11. COLORS AND FINISHES: AS INDICATED ON FINISH PLAN OR SCHEDULE
1. PROVIDE NEW BUILDING STANDARD MINI BLINDS AS REQUIRED AT PERIMETER OFFICES. I have reviewed these plans and have been
A. WEAR: SURFACE PILE TO WEAR BY NO MORE THAN 10X IN 10 YEARS. 12. ALL DOOR FRAMES TO BE PAINTED TO MATCH COLOR OF ADJACENT WALL FINISH LION. (REPLACE ANY DAMAGED WINDOW BLINDS AS REQUIRED WITH NEW BUILDING STANDARD BLINDS) given the opportunity to ask questions about
B. STATIC PROTECTION: 5 YEARS TO MAINTAIN SPECIFIED KV RATING. 13. PROVIDE PAINT SYSTEMS FOR VARIOUS SUBSTRATES AS SCHEDULED ON FINISH PLANS OR SCHEDULE. WORK SHALL BE them prior to issue. These plans conform
3-COAT QUALITY, USING COMPATIBLE PRIMERS ON SUBSTRATES, AS RECOMMENDED BY FINISH COAT MANUFACTURERS. WORK 2. REFER TO DRAWINGS FOR SPECIFICATIONS AND LOCATIONS OF BLINDS AT INTERIOR PARTITIONS. to our requirements. I understand that any
C. BACKING DELAMINATION: 5 YEARS. SHALL MATCH EXISTING WHERE APPUCABLE. modifications to these plans will be an
additional service with potential impact on
D. DIMENSIONAL STABILITY: 5 YEARS. A. FERROUS METAL (DOOR FRAMES): D. ALUMINUM (DOOR FRAMES): 3. SUBMITTALS construction cost and scheduling.
E. INSTALLATION: 2 YEARS; EXCEPT FOR EDGE RAVEL 5 YEARS 1ST COAT: METAL PRIMER-RUST INHIBITIVE 1ST COAT: CHROMATE METAL PRIMER A. MANUFACTURER'S PRODUCT DATA: SUBMIT MANUFACTURER'S DESCRIPTIVE PRODUCT DATA AND INSTALLATION INSTRUCTIONS FOR
2ND COAT: SEMIGLOSS ALKYD ENAMEL 2ND COAT: SEMIGLOSS ALKYD ENAMEL EACH TYPE OF BLIND SPECIFIED. C ACCEPTED AS IS
2� PROVIDE A COPY OF MANUFACTURER'S STANDARD WARRANTY FOR REVIEW PRIOR TO AWARD OF CONTRACT FOR THIS WORK. 3RD COAT: EGGSHELL ALKYD ENAMEL 3RD COAT: SEMIGLOSS ALKYD ENAMEL ACCEPTED AS NOTED
TMWS B. SHOP DRAWINGS: SUBMIT SHOP DRAWINGS INDICATING THE FOLLOWING:
1, BROADLOOM CARPET: PROVIDE CARPET OF COLOR AND MANUFACTURER AS SCHEDULED ON THE DRAWINGS; NO B. GYPSUM WALLBOARD: E ELEVATOR HOISTWAY DOORS: 1.) FIELD-MEASURED DIMENSIONS OF OPENINGS SCHEDULED TO RECEIVE BUNDS. Signature Date:
SUBSTITUTIONS. 1ST COAT: PVA SEALER (ROLLER APPLIED) 1ST COAT: PRIMER/SEALER AS RECOMMENDED BY MANUFACTURER. 2.) ILLUSTRATIONS OF SPECIAL ACCESSORY COMPONENTS NOT INCLUDED IN MANUFACTURER'S PRODUCT DATA.
2ND COAT: 100% ACRYLIC ENAMEL, EGGSHELL 2ND COAT: HIGH GLOSS POLYURETHANE ENAMEL 3.) DETAILS OF HEAD AND SILL CONDITIONS, CORNER CONDITIONS, AND CONDITIONS BETWEEN ADJACENT BLIND UNITS.
2. PAD: CARPET PAD TO BE 64 OZ. MIN. COMMERCIAL CARPET CUSHION, INSTALLED PER MANUFACTURER'S 3RO COAT: 100% ACRYLIC ENAMEL, EGGSHELL 3RD COAT: HIGH GLOSS POLYURETHANE ENAMEL
SPECIFICATIONS. C. COLOR SAMPLE: SUBMIT TWO 6-INCH (0.15M) SAMPLES OF MATERIAL IN SPECIFIED COLOR(S)
A C. W000 (OPAQUE):SUBMIT SAMPLE TO ARCHITECT FOR APPROVAL. D. PRODUCT SAMPLE: SUBMIT ONE 16-INCH WIDE FULLY FUNCTIONAL SAMPLE BLIND. All drawings and written material herein, as instruments
1ST COAT: ENAMEL UNDERCOAT of service, shall remain the property of International
3. TACKLESS CARPET STRIP: WATER-RESISTANT PLYWOOD STRIPS, THICKNESS AS REQUIRED TO MATCH PAD THICKNESS, WITH 2ND COAT: SEMIGLOSS ALKYD ENAMEL of n Partnership,shall Inc, DP and shall not be International l
3RD COAT: SEMIGLOSS ALKYD ENAMEL g P ) reproduced
ANGULAR PINS PROTRUDING FROM TOP TO GRIP AND HOLD STRETCHED CARPET AT THE BACKING. PROVIDE NARROW STRIPS or copied, in whole or in part, without the expressed
WIDTH EXCEEDS DS OF PINS ERE STRETCHED WIDTH OF CARPET IS 20 FEET OR LESS; WITH 3 ROWS OF PINS WHERE CARPET WALLCOVERING (09950) DIVISION 13: SPECIAL CONSTRUCTION written consent of IDP and may not be used or
NOT USED NOT USED referenced for any other project. Information contained
4. CARPET EDGE GUARD, NON-METALLIC: PROVIDE EXTRUDED OR MOLDED HEAVY-DUTY VINYL OR RUBBER CARPET EDGE GUARD herein represents proprietary information of International
OF SIZE AND PROFILE INDICATED ON DRAWINGS AND WITH MINIMUM 2 INCH WIDE ANCHORAGE FLANGE; COLOR(S) SELECTED BY Design Partnership and/or its Client and shall not be
ARCHITECT FROM STANDARD COLORS AVAILABLE WITHIN THE INDUSTRY. DIVISION 14: CONVEYING SYSTEMS disclosed to others. Those who use these documents
5. ADHESIVE: WATER-RESISTANT, NON-STAINING TYPE AS RECOMMENDED BY CARPET AND PAD MANUFACTURERS TO SUIT DIVISION 10: SPECIALTIES NOT USED do so in confidence.
APPUCATIONS AND TRAFFIC LOAD. FIRE EXTINGUISHERS (10522) DIVISION 15: MECHANICAL, ELECTRICAL, & PLUMBING
0. SEAMING CEMENT FOR DIRECT-GLUE APPLICATIONS: SEAM SEALER AS RECOMMENDED BY CARPET MANUFACTURER, FOR 1. PROVIDE AND INSTALL BUILDING STANDARD FIRE EXTINGUISHERS IN ACCORDANCE WITH LOCAL CODES. USE FULLY RECESSED REFER TO MEP DOCUMENTS PREPARED BY THE ENGINEERING FIRM INDICATED IN SECTION 00800 FOR SPECIFICATIONS AND
I
BUTTERING CUT EDGES AT BACKING TO FORM SECURE SEAMS AND PREVENT PILE LOSS AT SEAMS. EXTINGUISHERS EVERYWHERE POSSIBLE, AND SEMI-RECESSED OTHERWISE SCHEDULES.
Architect of Record: c'N
. MISCELLANEOUS MATERIALS: AS RECOMMENDED BY MANUFACTURERS OF CARPET, PAD AND OTHER CARPETING PRODUCTS, Charles Myers
AND SELECTED BY INSTALLER TO MEET APPLICATION AND TRAFFIC LOAD. 2. EXTINGUISHERS TO BE PLACED IN OR NEAR ACCESS WAYS AT A MAXIMUM TRAVEL DISTANCE OF 75 TO A FIRE EXTINGUISHER. DIVISION 16: FIRE & LIFE SAFETY
3. FIRE EXTINGUISHERS TO BE PLACED AT A RATIO OF I EVERY 2500 U.S.F. FURNISH, AND INSTALL EXTINGUISHERS AS INDICATED ON REFER TO MEP DOCUMENTS PREPARED BY THE ENGINEERING FIRM INDICATED IN SECTION 00800 FOR SPECIFICATIONS AND State of Florida
PRODUCTION LOTS DRAWINGS. I ,
SCHEDULES. Registration # `
1. PROVIDE SUFFICIENT MATERIAL OF EACH TYPE OF CARPET PRODUCT TO PREVENT MINGLING OF MATERIAL FROM DIFFERENT 4. SUBMITTALS: AR0014546
LOTS IN ANY ONE ROOM, SPACE OR FLOOR AREA.
A. SUBMIT THE FOLLOWING IN ACCORDANCE WITH SECTION 01340.
1
EXAMINATION
D(AMINOE SUBSTRATES AND SITE CONDITIONS, B. PRODUCT DATA. MANUFACTURER'S TECHNICAL DATA AND INSTALLATION INSTRUCTIONS.
2. EXAMINE AND ENSURE SLAB PREPARATION WORK. C. INSTALL TAG INDICATING DATE AND NAME OF COMPANY PLACING CHARGE IN CANISTERS.
D. EXTINGUISHER CABINETS TO BE PAINTED TO MATCH ADJACENT WALL UNLESS OTHERWISE NOTED
PREPARATION E. AFTER INSTALLATION AND FINISHING IS COMPLETE, APPLY SILK-SCREENED INTERNATIONAL FIRE EXTINGUISHER SYMBOL
1. CLEAN FLOORS OF REMAINING FOREIGN MATTER. APPLY SEALER IF REQUIRED TO PREVENT DUSTING. ON CABINET DOOR IN COLOR SELECTED BY ARCHITECT.
2. TREAT CONCRETE FLOORS AS REQUIRED TO OBTAIN NEUTRALITY RELATIVE TO ACIDITY AND ALKALINITY.
3. PROTECT OTHER WORK FROM DAMAGE RESULTING FROM CARPET INSTALLATION. NTERVAL
OPERABLE PANEL PARTITION (10650)
TACKLESS STRIP AND EDGING INSTALLATION NOT USED
I. INSTALL TACKLESS CARPET STRIPPING AND EXPOSED EDGING WITH ADHESIVE OR BY NAILING OR BOTH WHERE REQUIRED FOR INTERNATIONAL ADEQUATE STRENGTH.
A. LOCATE PROPERLY FOR CONCEALMENT OF CARPET EDGE BETWEEN STRIPPING AND BASE OF WALL TOILET AND BATH ACCESSORIES (10800)
B. STRIP ENTIRE PERIMETER OF EACH SPACE SCHEDULED FOR CARPET ON PAD AND, WHERE NEEDED, AT OBSTRUCTIONS NOT USED
AND CUTOUTS.
C. INSTALL EDGING STRIPS WHERE CARPET TERMINATES AT OTHER FLOOR COVERINGS UNLESS OTHERWISE INDICATED. USE 4th Floor
ONLY FULL LENGTH PIECES AT WALL OPENINGS; BUTT TIGHT TO VERTICAL SURFACES. WHERE SPLICING CANNOT BE AVOIDED 6262 Sunset Drive
SUCH AS AT LONG OR UNINTERRUPTED RUNS, BUTT ENDS TIGHT AND FLUSH. Miami, F1 33143
2. COMPLETE SEAMING AS LAYOUT PROGRESSES AND BEFORE STRETCHING. HAND SEW SEAMS AS REQUIRED. LAY CARPET ON
PAD AND POWER STRETCH ON THE TACKLESS STRIPS, FULLY SETTING ALL PINS INTO BACKING WrTH EVEN TENSION.
PAD INSTALLATION
I. INSTALL PAD USING FULL ROLL WIDTH TO MAXIMUM PRACTICAL EXTENT. INSTALL PAD SEAMS AT 90 DEGREES TO CARPET Owner: Jeff Weiss
SEAMS.
433 Plaza Real, Suite 275
. BUTT EDGES FIRMLY TOGETHER AND TIGHT TO FACE OF EDGE STRIPS. TAPE JOINTS.
Boca Raton, FL 33432
3. REMOVE AIR POCKETS AND RIDGES AND SLIGHTLY STRETCH. ANCHOR SECURELY AROUND PROJECTIONS AND CONTOURS. Contact: Jeff Weiss, (561) 416-4600
A. SECURELY ADHERE PAD TO SUBSTRATE WITH MATERIALS AND METHODS RECOMMENDED BY MANUFACTURER.
MERAL CARPET INSTALLATION REQUIREMENTS Date: 02-29-00
1. INSTALL CARPET IN ACCORDANCE WITH CRI-104. LAY OUT CARPET AS DIRECTED BY THE APPROVED SEAM DIAGRAM. Project ND: 8056.10
2. DO NOT INSTALL SEAMS OCCURRING PERPENDICULAR TO OPENINGS CLOSER THAN 12 INCHES TO EDGE (JAMB) OF OPENING. Drawn By: kt
� 3. INSTALL SEAMS OCCURRING PARALLEL TO OPENINGS AT THE CENTERLINE OF DOORS AND AT THE CENTERLINE OF THE
Checked By: mb
OPENING DEPTH WHERE NO DOORS OCCUR. CADD File as-idp\interval\04\*.dwg
4. COMPLETE SEAMING AS LAYOUT PROGRESSES AND BEFORE STRETCHING. HAND SEW SEAMS AS REQUIRED
5. LAY CARPET ON PAD AND POWER STRETCH ONTO TACKLESS TRIPS, FULLY SETTING ALL PINS INTO BACKING WITH EVEN Title,
TENSION.
6. BEFORE CUTTING, COMPLETELY UNROLL CARPET AND INSPECT FOR CONSISTENT COLOR AND PATTERN MATCH BETWEEN EACH SPECIFICATIONS
ROLL FROM EACH PRODUCTION LOT.
7, MAINTAIN PATTERN ALIGNMENT WHERE SEAMS OCCUR IN PATTERNED CARPET.
8. INSTALL CARPET IN FULL-ROLL WIDTH. WHERE LESSER WIDTHS OCCUR, DO NOT INSTALL STRIPS NARROWER THAN 12
INCHES. SCALE: 1/4" = 1 -O
9. MAKE REQUIRED CUTS STRAIGHT AND TRUE. JOIN AND SEAL SEAMS WITH SEAM SEALER, USING METHODS RECOMMENDED BY Sheet NO.:
CARPET MANUFACTURER, INSTALL SEAMS STRAIGHT, WITHOUT OVERLAPS, PEAKS AND GAPS.
10. LAY CARPET ON FLOORS WITH RUN OF PILE AS SHOWN ON SHOP DRAWINGS. DO NOT CHANCE RUN OF PILE IN ANY ONE
ROOM OR FROM ONE ROOM TO NEXT. A4 - I I o3