00-1099-003 Anchoring Systems
4.2.4 HSE 2421 Epoxy Adhesive Anchor
Influence of Temperature on Bond Strength Gel/o:vre Tinie'
120.0
100.0 Temperature Gel Times Cure Times
60.0 3E"2°C 45 minutes 60 hours
60.0
40°F/5°C 30 minutes 55 hours
,.,
68 'r 15 minutes 26 hours
40.0 Installed(a]70 F 86°F/30°C 11 minutes 16 hours
20.0 ' ' Installed 35 F
115°F/46°C 2.5 minutes 8 hours
0.0 1,Times listed above are a function of base material temperature.
0 50 1 Do 150 200 250
Temperature,F not ambient air temperature
Note:Test procedure involves the concrete being held at the elevated temperature for 24
hours then removing it from the controlled environment and testing to failure.
4.2.4.4 Installation Instructions
0 4011 o 0 o t
0 0
° O X77
1.Drill anchor hole. 2.Clean hole with a wire or 3.Insert air nozzle to bot- 4.Remove plastic wrap 5.Place cartridge in Hilb
nylon brush. Proper tom of hole and blow on threads and pop manual or pneumatic
hole cleaning is essential out hole using com- out end plugs. HSE dispenser.
pressed air.
RESIN,WHI E)
WIFDENEH IBIACp � o�
6.Actuate dispenser to 7.Attach HSE 2421 mixer 6.Discard adhesive until 9.Fill hole starting at 10.Insert dowel.rebar Breaded
fill neck of resin and using retaining nut and a uniform gray color the bottom about 1/2 rod or HIS slowly twisting a
hardener tubes. tighten. is achieved. to 213 full. into hole.After the anchor has
fully cured.apply a torque no(
to exceed maximum recom-
4.2.4.5 ORDERING INFORMATION mended torque_
HAS Rod' HAS Super HAS 304 SS" Qty.
Item No. Description Includes Description Item No. Item No. Item No. Per Box
00333774 HSE 2421 (33 oz) (10/master carton) 1 Cartridge 'h'x 5'/s 00068666 00068657 00068675 10
00333773 HSE 2421 (16.5 oz) (20/master carton) 1 Cartridge /r'x 6'/:' 00068667 00068658 00068676 10
00254428 HSE S Manual Dispenser(for 16.5 oz size) 1 Dispenser 'l.x 7'/a' 00068668 00068659 00068677 5
00334631 HSE Large Manual Dispenser(for 33 oz size) 1 Dispenser x 91/a 00068669 00068660 00068678 5
00334632 HSE Large Pneumatic Dispenser(for 33 oz size) 1 Dispenser '/a x 10" 00068670' 00068661' 96802006' 5
00333776 Mixer 1 Mixer 1'x 12' 00068671 00068662 96802007' 5
003337771 Retaining Nut for HSE 2421 Mixer 1 Nut 1'/.x 16' 1 00068672 100068663 5
1. Hot Dipped Galvanized
2. 316 Stainless Steel HAS Rods are also available.
3. More HAS rod lengths are available,refer ro HILTI Product Catalog or call a Customer Service Representative at 800-879-8000.
4.Available by the individual piece.
HAS-E Standard, HAS-E Super, HAS-E Stainless Steel Rods
HAS-E Standard HAS-E Super HAS-E Ss
ISO 898 Class 5.8 ISO 898 Class 8.8 AISI 304 SS Quantity
Description Item No. Item No. Item No. per Box
3/8"x 51/8' 00333183 00333216 00333169 20
112"x 61/2' 00333190 00333217 00333171 20
5/8'x 8' 00333194 00333218 00333175 10
3/4'x 9 5/8' 00333201 00333219 00333177 10
71T x 10' 00333208 00333176 00333181 5
1"x12' 00333210 00333220 00333182 2
11/4'x 16' 00333214 00333224 - 2
1.7/8'x 11'
Hilt Product Technical Guide 10/99 93