00-1099-001 Anchoring Systems
HSE 2421 Epoxy Adhesive Anchor 4.2.4
4.2.4.1 PRODUCT DESCRIPTION
The Hilt HSE 2421 is a high strength two-part adhesive epoxy system. 4r. <
The HSE 2421 is used to install reinforcing steel and*.hreaded rods it to
solid concrete base materials. `
Product Features
• Superior bond performance
• Extended temperature range(cures in temperatures 35'F to 115°F) i •{
• Optimum neVcure time
• No offensive'odor
• Passes ICBO AC58 for seismic and wet holes
Listings/Approvals
• Meets DOT requirements for most states;contact the Hilt Technical Staff
• Meets requirements of ASTM C881-90,Type IV,Grade 3, Class A, B,C except gel times.
• Meets requirements of AASHTO Specification M235,Type IV,Grade 3, Class A,B,C except gel times.
• International Conference of Building Officials(ICBO):report pending
4.2.4.2 MATERIAL SPECIFICATIONS
Mechanical Properties for HSE 2421
Bond Strength ASTM C882-91'
2 day cure 12.8 N/mm' 1860 psi
7 day cure 13.8 N/mm' 2000 psi
Compressive Strength ASTM D-695-96' 100.2 N/mm' 14,530 psi
Compressive Modulus ASTM D-695-962 2000 N/mm' 0.29 x 101 psi
Tensile Strength 7 day ASTM D-638-97' 48.8 N/mm' 7080 psi
Elongation at Break ASTM D-638-97' 1.5% 1.5%
Heat Deflection Temperature ASTM D-648-95 66YC 152'F
Absorption ASTM D-570-95 0.06 0.06
Linear Coefficient of Shrinkage on Cure ASTM D-2566-86 0.002 0.002
1.Minimum valuer,obtained as the result of tests at four cure temperatures(35,40,60,73'F).
2.Minimum values obtained as the result of tests at three cure temperatures(35,40,60T). MECHANICAL
PROPERTIES
f, min.f,
MATERIAL ksi(MPa) ksi(M Pa)
Standard HAS rod material meets the requirements of ASTM A36 36 (248) 58 (400)
High Strength or'Super HAS'rod material meets the requirements of ASTM Al 93,Grade B7 105(724) 125(862)
Stainless HAS&HAS-E rod material meets the requirements of ASTM F593(AISI 304)Condition CW 3/8"-5/8" 65 (448) 100(689)
Stainless HAS&HAS-E rod material meets the requirements of ASTM F593(AISI 304)Condition CW 3/4'-1 1/4" 45 310) 85 (586)
Standard HAS-E rod material meets the requirements of ISO 898 Class 5.8 58 (400) L_72.5(500)
Super HAS-E rod material meets the requirements of ISO 898 Class 8.8 92.8(640) 1 116 (800)
HAS Standard Nut material meets the requirements of ASTM A563,Grade A
HAS Super,HAS-E Standard&HAS-E Super Nut material meets the requirements of ASTM A563,Grade DH
HAS&HAS-E Stainless Steel Nut material meets the requirements of ASTM F594
HAS Standard and Stainless Steel Washer meets dimensional requirements of ANSI 1318.22.1 Type A Plain
HAS Super,HAS-E Standard&HAS-E Super Washers meet the requirements of ASTM F436
All HAS standard&HAS Super Rods(except 7/8"),HAS-E Standard&HAS-E Super,HIS inserts,nuts&washers are zinc plated to ASTM 8633 SC1
'/e"HAS Standard&HAS Super rods hot-dip galvanized in accordance with ASTM A153
Note:Special Order product may vary from standard materials,but meets or exceeds mechanical properties of HAS mater-491s,
�A V�
86 Hilt Product Technical Guide 10/99