ARC-DanteFascellPark2-5-A7337A-11X17This playground system design meets
the requirements for access under the
Accessibility Guidelines when properly
installed over accessible surfacing.
Manufactured by Krauss Craft, Inc.
TM
IMPORTANT: The colors shown are for illustration purposes only.
Actual colors may vary. Contact your Playcraft Rep for accurate color samples.
WARNING: An impact absorbing safety surface is required under and around all playground equipment.
DANTE FASCELL PARK 2-5 w/ ALUMINUM POSTSSITE PLAN
PROJECT#: ARC15A7337A PLAYCRAFT REP:
Advanced Recreational ConceptsDATE: 1/21/2015| DRAWN BY: KJK MIN. USE ZONE: 71' x 31'
GENERAL NOTES:This Preliminary Site Plan is based on measurements that were provided in the initial
planning phase. All dimensions
must be verified prior to the
submission of a purchase order.
Krauss Craft, Inc. will not be
held responsible for any
discrepancies between actual
dimensions and dimensions
submitted in the planning
phase.
The Minimum Use Zone for a
play structure is based on the
product design at the time of
proposal. Components and
structure designs may be
subject to change which may
affect dimensions. Therefore,
before preparing the site, we
strongly recommend obtaining
final drawings from the factory
(available after the order is
placed and included in the
Assembly Manual).
WARNING: Accessible safety
surfacing material is required
beneath and around this
equipment that has a critical
height value (Fall Height)
appropriate for the highest
accessible part of this
equipment. Refer to the CPSC'S
Handbook For Public
Playground Safety, Section 4:
Surfacing.
R35 FOR KIDSAGES2-5ADA ACCESSIBILITY GUIDELINE - ADAAG CONFORMANCEELEVATEDACCESSIBLERAMP ACCESSIBLEGROUNDTYPES66/3 0 9/25/2
Back Perspective
Front Perspective
Site Plan
RH-3
2-5For Kids
Ages
System
Type DANTE FASCELL PARK 2-5
Project# A7337A - DATE: 1/22/2015