13-452-049Instractions for Energy 5 iel _Thermal Barrier Paint Additive
Call us toll free at: B?7 -B 3S -2438
o r dial local at: 305-887-266S
Directions for use:
Always mix Energy Shield Thermal Barrier Paint Additive in a larger container than the paint came in
0 REGINA L - Liter: Mix either 6.75 fl.oz. (volume) or 51.5 grams (weight) of Energy Shield
Thermal Barrier Paint Additive per 1 liter of paint.
Gallons: Mix either 25.5 fl.oz. (volume] or 7 oz. (weight) of Energy Shield Thermal
Barrier Paint Additive per 1 gallon of paint.
• Volume will increase by approximately 2O%
ULTRA- Liter: Mix either 5.6 fl.oz. (volume) or 74 grams (weight) of Energy Shield ULTRA
Thermal Barrier Paint Additive per 1 liter of paint.
Gallons: Mix either 21 fl.oz. (volume) or 10 oz. (weight) of Energy Shield ULTRA
Thermal Barrier Paint Additive per 1 gallon of paint.
• 'Volume will increase by approximately 15%
• lwlixi n g r eco rnme n d ation:
-o 4 liters of paint: use at Least a 6 liter bucket and add 1 unit of Energy Shield Thermal
Barrier Paint Additive
-o 2 0 liters of paint ns e at least a 30 liter b u cicet and add 5 units of E nergy Shle 1 d Thermal
Barrier Paint Additive,
• Paint containing Energy Shield Thermal Barrier Paint Additive can be applied with a brush,
roller, or sprayer
c: When using a sprayer the recommended tip size is ,61-7 -.621
o The small cartridge filter for the sprayer must be removed to avoid filtering out the
additive.
Note: if paint fs not wa ter base d, follow thinnIngr instructfons on paint
F Add the Energy Shield Thermal Barrier Paint Additive gradually to your paint while stirring
to avid clumping of the glass microspheres in the additive,
• Always stir your paint for a minute or two prior to commencing painting if the paint has
been sitting for more than 2 hours since last used.
• The optimal application for energy savings is two coats of paint containing ad di-t i-ve
Enerev Shield Thermal Barrier Paint Additive will add slinht texture, and may slightly_ affect _the _hue
of da rker colors
• Additive will leave a very mild, velvety texture to the surface to which it has been applied,
but will not visually affect most wall surfaces.
• Additive mayappear to Lighten darker colors one hue.
• The additive will flatten the finish of the paint one degree
• Additive is inert, and will not affect the chemical properties of the paint in any way,
For more information: call us loft Free at 877 -835 -2438
- Revised 11X30%2012