12-354-002Miami -Dade Fire Rescue
Fire Alarm Pre - Submittal Checklist
Based On NFPA 72 2002 edition & NFPA 1 and 1012006 edition
[T
This system Is an "Existing Remote Supervising Station Fire Alarm System" and Is
stated as such on the plans. (24 hours of secondary power) AHJ may require
documentation of prior approval of system as a Remote Supervising Station Fire X
Alarm System In the form of the original Fire Dept. approved job copy set of plans
18 or certified microfilm copy of same.
A complete detailed statement of the scope of work is stated on the plan. Please
note that the complete tenant space, In its entirety, will be Inspected for compliance X
19 with NFPA 72 (2002) and NFPA 101 (2006), or prior editions of these. codes H
applicable.
20 Is the building "New" or "F.xlsting" x and is indicated as such on the X
MIAMi�DADE
21
suppression systems, number of stories, square footage per floor, and elovation of
X
-
Fj
the last occupied floor if over.5 stories.
A location key is provided Showing the area of proposed work within the building.
22
Also a site key for projects with multiple buildings showing locations of all
X
buiidin as with addresses.
All Interconnected fire alarm control panels are arranged to function as a single
23
system and monitored for int rI as per NFPA 72.
x
The class and/or style are shown for all initlating device circuits, signal line circuits
24
and notification appliance circuits,
X
The maximum number of each device type is provided for each IDC based on
25
device load or each SLC, based on class and style, per NFPA 72 and the
34
manufacturer's specifications.
X
A specific sequence of operation including all alarm, supervisory, trouble and
35
control functions such as fire sprinkler, door release, smoke control. elevator
x
26
recall, suppression systems, and transmission of signals offslte, etc„ are specified
X
36
on the otan.
x
The type of monitoring station, (i.e. fisted central station, remote supervising
station, listed proprietary supervising station), where alarm, trouble, and
27
supervisory signals are transmitted to, ta clearly and conslstenlly stated in the
x
se uence of o eratlons.
28
The method of communication to thn rre..nit.,.in..
30
.. una uwwa.v {.vllia/na vlevawm, out elevators are not capable of recall, written
documentation on elevator manufacturer's letterhead advising that elevators are
X
-
Fj
not ca able of recall function 1 avided.
If this building does not contain a fire alarrn system, and fire alarm panel is
L31
exclusively for elevator recall, plans clearly designate same as "Elevator Recall
X
Control and SupervIsory Panel "..
Manufacturer and model number for each device, module, power supply and
32
component ls,specified in the Mrmbol le end.
X
Each device, module, appliance and component Is Identified with its own unique
33
number and indicated on the floor plan and riser. Also label each module and relay
x
function on riser.
Floor plans are drawn to 118" scale or, tf using another scale, all device coverage is
34
diagrammed on dimettsithe- lan and ail ro8rrm ins are included.
X
All rooms & spaces are labeled Indicating, their use, and the occupant load has
35
bean provided for all assembly use rooms with an occupant load of 50 or greatei.
x
All new, existing, replaced or relocated devlges are Indicated on the floor plan and a
36
complete riser diagram showing ail new " existing devices of the entire fire alarm
x
All devices In areas in which the voltage, temperature, and humidity variations
exceed those conditions stated in NFPA 72, are listed for conditions and all such
38 areas are Identified. Time FACP and NAC Panels are located in a mechanically X
ventilated room or conditioned space.
A note Is provided on the plans stating "Room containing FACP andlor Booster
Power Supply panels) is mechanically ventilated ", If applicable. x
39
Phone #:
Designed by:
CALVIN C. REYNOLDS JR. 954- 862 -5223
Signature f`teatcd lry; NIDFR 11 / 2009 0a -
THIS IS A _ DOCUMENT ON ALL FIRE ALARM PLAN SUBMITTALS