13-189-003GENERAL PLU M91NG NOTES
1. A. ALL WORK SHALL BE DONE in accordance with the Florida
Building Code and with all applicable regulations.
B. DRAWINGS: Refer to all drawings for coordination of the
plumbing work.
C. ARRANGE AND PAY for all permits, licenses, inspections
and tests. Obtain the required certificates and present
to owner.
D. GUARANTEE: The completed installation shall be fully
guaranteed against defective materials and /or improper
workmonship for a minimum of one year for material and
labor.
E. ALL HORIZONTAL SANITARY PIPING shall slope at 1/8 inch
per foot minimum for 3" and larger and at 1/4" slope
for 2 1/2" pipes and smaller.
F. ALL materials shall be new, free of defects and correctly
labeled with their appropriate listing agency.
2. SHOP DRAWINGS: Contractor shall submit for approval, within
30 days of signing contract, a minimum of five copies of fully
descriptive literature, including but not limited to: water
heaters, and plumbing fixtures. No work shall proceed without
the approval of these submittals.
3. PLUMBING FIXTURES: Fixtures shall be as selected by owner
and shall be furnished and installed by this contractor. Fixtures
shall be complete with drains, traps, supplies and any other
accessory required. Fixtures and faucets shall comply with the
FBC Water saving standards.
4. MATERIALS:
A. PIPING:
a. Soil, waste and vent, and storm: Sanitary pipe, Cast Iron
under ground, Schedule 40 above ground.
All no HUB connections shall be with cast iron coupling.
All piping in return plenums shall be cast iron.
b. Domestic water: CPVC pipe and fittings.
c. Domestic water supply assembly. Chrome finish tubing
with angle shut off valves in exposed areas.
d. P & T Relief lines: CPVC pipe and fittings
e. Drain Pan lines: DWV PVC pipe and fittings.
f. Insulated all hot water and condensate drain piping.
5. PIPING TEST AND DISINFEC11ONS:
A. Test; All sanitary and domestic water supply piping shall
be tested for leaks before piping is concealed or connected
to equipment and plumbing fixtures.
B. Disinfection: All domestic water piping shall be
disinfected by introducing a solution of calcium
hypochlorite of 50 parts per million of chloride and as
per AWWA Standards.
6. VALVES: Domestic water valves shall be of bronze body,
sweat ends.
7. CONTRACTOR SHALL COORDINATE exact location of all plumbing
system piping before starting any work. Notify
Architect /Engineer of any deviations from design drawings.
8. CONTRACTOR SHALL provide all necessary labor and materials
for a complete "turn —key plumbing system.
9. CONTRACTOR SHALL keep accurate as —built dwgs on the field and provide
them to owner once job is complete.
10. CONTRACTOR SHALL familiarize himself with job site and with all
construction documents including architectural, electrical. HVAC, and
structural dwgs, prior to bidding. Add stments in the plumbing system to
accommodate other disciplines should be expected, and shall not represent
additional costs to owner. Notify Arch itect/Enign eer of any discrepancies
prior to commencement of work.
11. Provide wall cleanouts at the base of every stock.
12. CONTRACTOR SHALL obtain insurance protect against public liability and
property damage for the duration of work.
16. CONTRACTOR SHALL use dimensions in architectural drawings to
rough —in plumbing work.
PLUMBING SYMBOL LEGEND
SYMBOL
DESCRIPTION
WASTE
SANITARY LINE
— — — -- -
VENT LINE
SO
STORM DRAIN LINE
—+- ---r
SAFEWASTE LINE
CD ---
CONDENSATE LINE
1/2y
GATE VALVE
-
COLD WATER LINE
--
HOT WATER LINE
P-
PLUMBING FIXTURE DESIGNATION
AAV
AIR ADMITANCE VALVE
FCO
FLOOR CLEAN OUT
2"
FLOOR PENETRATION
In
MECHANICAL SHOCK
AS SELECTED BY OWNER.
ARRESTOR
WCO
WALL CLEANOUT
VTR
VENT THRU ROOF
COVER SECURED
WITH SCREWS
THREADED C,O. PLUG
,-FIN, GRADE
4 X 6' DIA, CONCRETE
PAD FLUSH W /FIN. GRADE
TYPICAL, CLEANOUT DETAIL
FIN.
I
SLIP JOINT
EXTERIOR TYPE
ADJUSTABLE
THREADED C,O, PLUG
FLOOR
WALL
FACE OF WALL
STAINLESS STEEL COVER
SCREWED TO THREADED
C.O. PLUG.
PLUMBING FIXTURE CONNECTION SCHEDULE
NO.
DESCRIPTION
WASTE
VENT
WATER
REMARKS
COLD
HOT
P -1
WATER CLOSET
3"
- --
1/2y
- --
AS SELECTED BY OWNER.
P -2
LAVATORY
2"
2"
1/2"
- --
AS SELECTED BY OWNER.
P -3
SHOWER
2"
2"
1/2"
- --
AS SELECTED BY OWNER.
flashing cycle
NOTES: 1.- All exposed trim, such as P- traps, angle stops, and supplies shall be chrome plated.
2.- All fixtures shall comply with Reference Standards as per FBC Plumbing 406 through 421.
MAXIMUM FLOW RATES AND
CONSUMPTION
TABLE 604.4
VOLTS
PLUMBING FIXTURE
FLOW RATE
FLOW PRESSURE
OR FIXTURE FITTING
(gpm)
(psi)
LAVATORY, PRIVATE
1.0
60
LAVATORY, PUBLIC, (METERING)
0,25 gallon
per metering
-- --
cycle
LAVATORY, PUBLIC, (OTHER THAN METERING)
0.50
60
SHOWER HEAD
1.50
80
WATER CLOSET
1.28 gallons per
flashing cycle
SHUT-OFF -
VALVE
1/2"
" CW
VALVE �t)
INSTANTANEQUS WATER HEATER
NTS
WATER HEATER NOTES
MODEL
MAX, KW
AT 220V
VOLTS
MAX, AMPS
AT 220V
REFERENCE
MANUFACTURER
PIPE
FITTING
EF
N -75
7.5
220
34
TITAN -SCR2
1/2"
0.98
INSTALL PER UL LISTING AND MANUFACTURER'S RECOMMENDATIONS, VERIFY SPACE PRIOR TO INSTLLATION
PROPOSED FLOOR PLAN - PLUMBING
SCALE: 1/4" = V -0"
City of South Miami
Building Dept.
6130 Sunset Drive
South Miami, FL 33143
i
:A-
ID A
o F
OQ-: CJ
%0: LO��
10 N
LEONARDO NAVEIRAS, INC.
"CONSULTING ENGINEERS"
Leonardo Naveiras P.M, CA# 25830
Julio C. Vidal P.E. PE# 52792
1918 Harrison St. # 207 Hollywood, FL 33020
Phone: 954-270-4822 Fax: 954.241.6850
E -mail: hvadeo @aotcom
W
w
W
0
LL
Q
Q � �
W �M
O /
4 I�_ nLL � Q
0 p
30
to 0
aLL
< N
N
DO .
w
z (�
CARMEN L. GUERRERO
FLORIDA REGISTERED ARCHITECT
ARS4154
P
COMMISSION NUMBER
81D SET -
PERMIT SET -
DRAWN BY: LNI
02 -OS -2013
THESE DESIGNS AND DRAWINGS
ARE THE COPYRIGHTED
PROPERTY OF CARMEN L.
GUERRERO ARCWITECT, P.A. AND
MAY NOT BE REPRODUCED, OR
DISCLOSED TO OTHERS WITHOUT
WRITTEN CONSENT OF THE
ARCHITECT.
THE CONTRACTOR SHAD, CHECK
AND VERIFY ALL DIMENSIONS OF
THE JOBS AND BE RESPONSIBLE
FOR THE SAME, REPORTING ANY
DISCREPANCIES TO THE
ARCHITECT BEFORE COMMENCING